Tynor Hot & Cold Pack I44 | Gel Bead Flexible Therapy Pack

• Flexible pouch — A soft, flexible TPU pouch conforms closely to the contours of the body.
• Gel beads — Hydrophilic gel beads hold the required hot or cold temperature for longer.
• Secure sealing — High-quality sealing keeps the pouch leakproof and durable.
• Hot & cold therapy — One reusable pack switches easily between warming heat and cooling cold therapy.
• Soft fabric cover — A plush, removable cover shields the skin from hot or cold burns.
• Elastic strap — Holds the pack securely and hands-free on a range of body parts.

The Tynor Hot & Cold Pack is intended to provide warming (heat) or cooling (cold) therapy for comfort and support, under the direction of a qualified healthcare professional.

Cold therapy can be used for:

• Minor swelling and soft-tissue injuries (sprains, strains, bruises)
• Cooling relief after an acute injury
• Post-surgical cooling comfort

Heat therapy can be used for:

• Muscle stiffness, tension and fatigue
• Joint and arthritic discomfort
• Back pain and general muscle soreness

ⓘ Important: Always use the pack inside its fabric cover. For heat, check the temperature before applying and never overheat. Cold and heat therapy are not suitable for everyone — see the cautions below and check with your doctor if you have a medical condition.

For cold therapy:

1. Place the gel pack in the freezer (around 0 °C) for at least one hour.
2. Put the chilled pack inside its fabric cover and apply to the affected area.

For heat therapy (microwave):

1. Lay the gel pouch flat in the microwave and heat for 45 seconds at 800 W.
2. Check the temperature; if needed, reheat in 10-second intervals.
3. Put the pack inside its fabric cover and apply to the affected area.

For heat therapy (hot water):

1. Heat water to boiling, then remove it from the heat.
2. Place the pouch in the water for about 10 minutes until it reaches the desired temperature.
3. Put the pack inside its fabric cover and apply to the affected area.

• 1 × Tynor Hot & Cold Pack (I-44) gel-bead pouch
• Soft fabric cover with elastic strap
• User instruction manual

• Always use the pack inside its fabric cover
• Hand wash the cover with mild detergent in water below 30 °C; do not wring
• Dry flat in the shade; do not dry-clean, iron or bleach
• Keep away from sharp edges and avoid dropping on hard surfaces

• Always use the pack inside its cloth cover
• Check the microwave wattage carefully — heating time varies with wattage; reheat only in short intervals
• Never place the gel pouch in a conventional oven or toaster, or near extreme or direct heat
• Not suitable for people with conditions such as rheumatoid arthritis, Raynaud's syndrome, cold-allergic conditions, paralysis or areas of impaired sensation — seek medical advice first
• Take extra care if you have difficulty sensing heat or cold
• For post-surgical use, follow your doctor's instructions
• If the gel contacts the skin or eyes, rinse immediately with water; if irritation or redness persists, consult a doctor
• Do not use if the pouch is punctured or damaged
• Do not sit or lie on the pack (excess weight may rupture it)
• Discontinue use and seek advice if you experience impaired sensation, reduced blood flow, allergic rash or itching, or if pain persists or worsens
• Keep out of reach of children

Can it be used hot and cold?
Yes — freeze it for cold therapy, or warm it in the microwave or hot water for heat therapy.

How do I heat it?
In the microwave (about 45 seconds at 800 W, then 10-second intervals if needed) or in hot water for around 10 minutes. Always check the temperature and use the cover.

How long does it stay hot or cold?
The gel beads are designed to retain temperature for an extended time, and it can be re-frozen or re-heated and reused.

Where can I use it?
On most body parts — knee, ankle, shoulder, back, hip or elbow — held in place with the elastic strap.

Product Code: I 44
Size: Universal (approx. 25 × 17 cm)
Temperature Range: approximately 0 °C to 75 °C
Materials: Pouch — TPU; Gel beads — Sodium Polyacrylate, Glycerine; Cover — Polyamide, Polyester, PET, Rubber, Polypropylene
Device Classification: Class I Medical Device
Manufacturer: Tynor Orthotics Pvt. Ltd.
Australian Supplier: Australian Healthcare Supplies

Download Product Manual