Tynor Walker Boot Air Pro Long D60 | Airbag Long Walking Boot
NDIS Participants
Ankle Fractures, Sprains & Post-Op Recovery
Post-surgical recovery
People needing extra walking support
NDIS Participant Support
The Tynor Walker Boot Air Pro Long (D-60) is a full-length orthopaedic walker boot designed to provide controlled, rigid immobilisation and comfort during foot, ankle and lower-leg recovery. Extending higher up the lower leg than the Short version, its lightweight moulded polypropylene full outer shell offers circumferential protection that limits unwanted motion, while a built-in pneumatic airbag system delivers adjustable 360° compression for a targeted, personalised fit. Inside, a breathable nylon liner, soft foam padding and a shock-absorbing EVA insole cushion the foot, and a wide anti-slip rocker sole supports a more natural walking pattern. The bilateral design fits either the left or right foot. Available in sizes S, M and L (by shoe size). Supplied by Australian Healthcare Supplies, a registered NDIS provider based in Perth, Western Australia.
- Rigid full outer shell — A lightweight, moulded polypropylene shell gives strong immobilisation and circumferential protection.
- Built-in airbag system — An integrated pneumatic air bladder provides adjustable 360° compression for a firm, personalised fit.
- Bilateral symmetry — Symmetrical design lets the boot be worn on either the left or right foot.
- Integrated air pump & release dial — Inflate with the built-in pump and deflate via the quick pressure-release dial to fine-tune compression.
- Wide rocker sole — Anti-slip rocker bottom designed to support a smoother, more natural gait.
- Cushioned interior — Breathable nylon liner, soft foam padding and a shock-absorbing insole designed to help take pressure off sensitive areas.
- Reverse-buckle straps — Wide adjustable hook-and-loop straps fasten securely for an easy, snug fit.
The Tynor Walker Boot Air Pro Long is intended to immobilise and protect the foot, ankle and lower leg with adjustable compression, under the direction of a qualified healthcare professional. It may assist in managing discomfort associated with the following conditions:
- Stable foot and ankle fractures
- Stable fractures of the lower tibia and fibula
- Severe ankle sprains
- Severe soft-tissue injuries
- Post-operative foot, ankle and lower-leg care
- Support following cast removal
- Protection during rehabilitation, as directed by a healthcare professional
- Unfasten all the hook-and-loop closures and remove the front rigid shell panel and liner.
- Make sure the air bladder is deflated before fitting.
- Place your foot into the liner with the heel positioned at the back.
- Reposition the front liner and shell panel, aligning them with the boot.
- Secure the straps from bottom to top for a snug fit.
- Open the bladder-pump cover on the side and inflate the airbag to the desired compression.
- Check comfort and stability before standing or walking; inflate or deflate as required.
- 1 × Tynor Walker Boot Air Pro Long (D-60)
- Integrated air pump & pressure-release dial
- Removable foam liner & shock-absorbing insole
- User instruction manual
- Close the hook-and-loop straps before cleaning
- Hand wash the soft components with mild detergent in cold water
- Wipe the plastic parts with a moist, lint-free cloth
- Dry flat in the shade; do not dry-clean, iron or bleach
- Store in a dry place at room temperature
- This is a rigid, high-immobilisation walker boot. Fitting, air-pad pressure and duration of use must follow the advice of a qualified healthcare professional.
- Inflate the airbag enough to immobilise the foot without restricting blood flow.
- Check comfort and stability before standing or walking.
- Keep sharp objects away from the boot — they may puncture the air bladder
- Discontinue use and seek medical advice if you experience impaired sensation, reduced blood flow, allergic rash or itching, or if pain persists or worsens
- Consult your doctor before using this device alongside another medical device
- Misuse or improper fitting can lead to adverse effects and decreased support
- Follow the instructions provided on the box
- Keep out of reach of children
- Please check with your doctor, physiotherapist, or healthcare professional to confirm this product is suitable for your condition and correct sizing.
What is the Walker Boot Air Pro Long used for?
It immobilises and protects the foot, ankle and lower leg with adjustable air compression to support recovery from stable fractures (including the lower tibia and fibula), severe sprains, soft-tissue injuries and post-operative care, as directed by a healthcare professional.
How is it different from the Short version?
The Long boot extends higher up the lower leg for greater coverage and support — suited to lower tibia/fibula fractures — while the Short version (D-59) has a lower profile.
Does it fit either foot?
Yes — the bilateral, symmetrical design works on the left or right foot.
How do I choose the right size?
Sizing is by shoe size — S: EU 35–39 / UK 2.5–6, M: EU 40–43 / UK 6.5–9, L: EU 44–47 / UK 9.5–12.
- Product Code: D 60
- Sizes Available: S, M, L (by shoe size — S: EU 35–39, M: EU 40–43, L: EU 44–47)
- Variant: Long (a Short version, D-59, is available separately)
- Fitting: Either foot (bilateral)
- Device Classification: Class I Medical Device
- Certifications: ISO 9001 · ISO 13485 · ISO 45001 · US FDA Registered · CE Marked · W.H.O. GMP
- Materials: Polypropylene, Nylon, Foam, Velvet fabric, EVA, TPU (air bladders)
- Manufacturer: Tynor Orthotics Pvt. Ltd.
- EC Representative: MT Promedt Consulting GmbH, Ernst-Heckel-Straße 7, 66386 St. Ingbert, Germany
- Australian Supplier: Australian Healthcare Supplies, Perth WA — registered NDIS provider
- Bulk & wholesale orders: sales@tynor.com.au