Tynor Lacepull LS Belt A30 | Lumbar Support Belt Australia

• Multi-pulley lacepull tightening mechanism — Designed to deliver independent compression to the mid-back and lower-back regions simultaneously; the pulley-multiply effect means significantly less pulling force is required to achieve firm, even compression across the lumbosacral region.
• Flexible body-conforming splints — Semi-rigid splints designed to take the contour of the lower back, assisting effective support and stabilisation while allowing natural movement — unlike rigid fixed stays.
• Adjustable compression while wearing — Compression level can be modified at any time throughout the day without removing the belt, adapting support to changing activity levels and comfort needs.
• Highly ventilated mesh body — Complex nylon mesh fabric designed for high aeration, skin comfort, and long functional life — suitable for extended daily wear including in warm conditions.
• Ergonomic, independent application — Designed to allow the user to wear, tighten, and remove the belt without assistance, including for older adults and those with limited grip strength.
• Designed to assist lumbar IVD decompression — The lacepull compression is designed to help elongate the thoracic cavity, assisting decompression of the lumbar intervertebral discs as directed by a clinician.

The Tynor Lacepull L.S. Belt may assist in managing discomfort associated with the following conditions:

• Lower back pain (lumbago) and lumbosacral muscle strain
• Lumbar intervertebral disc (IVD) conditions — degeneration, prolapse, and herniation
• Degenerative disc disease and lumbosacral spondylosis
• Lumbosacral spondylolysis and spondylolisthesis
• Lumbar vertebral fracture — as directed by treating clinician
• Post-operative stabilisation following lumbar spinal procedures
• Chronic lower back stiffness and muscular strain
• Occupational or postural lower back strain requiring adjustable compression support

Use under the guidance of a qualified healthcare professional. If your physiotherapist, GP, or spinal surgeon has recommended a lumbosacral belt or lumbar support, confirm product code A 30 with your clinician. NDIS participants should contact us to confirm funding eligibility.

1. Wear a thin cotton undergarment or liner beneath the belt.
2. Place the belt over the lower back region and wrap it around the waist, positioning the back panel over the lumbar spine.
3. Fasten the hook-and-loop closure at the front to a comfortable, firm fit.
4. Hold both lacepull cords and pull simultaneously to apply compression — adjust upper and lower sections independently as required.
5. Check that breathing and movement feel comfortable and unobstructed. The compression level can be further adjusted at any point while wearing.
6. Loosen or remove the belt during rest periods as directed by your clinician.

• 1 × Tynor Lacepull L.S. Belt (size as selected)
• Product instruction insert

• Close hook-and-loop closures before washing
• Hand wash only in mild detergent, water below 30°C — do not wring
• Dry flat in shade on a flat surface
• Do not dry-clean, iron, or bleach

• Use under the strict guidance of a qualified healthcare professional
• Do not overtighten the lacepull cords — compression should be firm but must not restrict breathing or circulation
• Discontinue use immediately and seek medical advice if you experience numbness, reduced blood flow, skin irritation, increased pain, or worsening symptoms
• For post-operative use, apply only as directed by your treating surgeon or physician — do not self-prescribe
• Consult your doctor before concurrent use with any other medical device or spinal support
• The product is preferably worn over a cotton undergarment to protect the skin
• Misuse or improper use may reduce effectiveness and lead to adverse effects
• Follow the instructions in the product box carefully
• Keep out of reach of children

What is the difference between the A30 and the A29 Lumbo Lacepull Brace?
Both products use the same multi-pulley lacepull mechanism.

The A30 is a belt with flexible splints that conform to the body — designed for everyday lumbar support, occupational use, and general lower back management.

The A29 is a structured brace with a rigid anatomical back panel and anterior plate compatibility — designed for more clinical applications and post-operative stabilisation. Confirm which is appropriate for your needs with your treating clinician.

Can the compression be adjusted without removing the belt?
Yes — the lacepull mechanism allows compression to be increased or reduced at any time, including while the belt is being worn. This is one of the key advantages of the lacepull design over standard hook-and-loop belts.

Can it be used after lumbar spine surgery?
The A30 is designed to assist post-operative stabilisation. Post-operative use must be directed and supervised by your treating surgeon or physician only — do not self-prescribe for post-surgical support.

Can I use NDIS funding?
Australian Healthcare Supplies is a registered NDIS provider. This product may be eligible under relevant NDIS support categories. Contact us to confirm eligibility for your plan.

Product Code: A 30
Sizes Available: S&M · L&XL · XXL&XXXL — see size chart image for waist measurements
Colour: Grey
Materials: Nylon woven mesh fabric, Semi-rigid flexible splints, Hook-and-loop closure, Lacepull cord and pulley system
Device Classification: Class I Medical Device
Certifications: ISO 9001 · ISO 13485 · ISO 45001 · US FDA Registered · CE Marked · W.H.O. GMP
Manufacturer: Tynor Orthotics Pvt. Ltd.
EC Representative: MT Promedt Consulting GmbH, Ernst-Heckel-Straße 7, 66386 St. Ingbert, Germany
Australian Supplier: Australian Healthcare Supplies, Perth WA — registered NDIS provider
Bulk & Institutional Orders: Contact us for hospital supply, clinic accounts, and volume pricing

Download Product Manual (PDF)