Tynor Back Support Belt A36 | Lumbar Support Australia
NDIS Participant Support
The Tynor Back Support Belt is a lumbar support belt designed to assist lower back support and postural comfort during daily activity through a combination of four flexible splints, a cushioned back pad, and a double-pull compression mechanism. Unlike belts with posterior-only stays, the A36 features two splints on each side of the spine, designed to conform to the natural lumbar curve and provide bilateral immobilisation support with even pressure distribution across the lower back. The breathable elastic body and adjustable double-pull mechanism are designed for comfortable extended wear, making it suitable for occupational use, daily activity, and general lower back management. Supplied by Australian Healthcare Supplies, a registered NDIS provider based in Perth, Western Australia.
- Four flexible splints — bilateral back support — Two splints on each side of the spine are designed to conform to the natural lumbar contour, providing bilateral support and gentle immobilisation with even pressure distribution — more comprehensive coverage than single posterior-stay designs.
- Cushioned back pad for comfort — Integrated back pad designed to provide comfortable cushioning to the lumbar region during extended wear, reducing localised pressure points during prolonged sitting, standing, or activity.
- Double-pull compression mechanism — Designed to allow firm, adjustable compression to be applied and modified throughout the day without removing the belt, adapting support to different activity levels and comfort needs.
- Breathable elastic body — Lightweight elastic construction designed for adequate ventilation and skin comfort during extended daily wear including in warm conditions.
- Broad hook-and-loop panel for easy fitting — Wide closure panels designed to allow independent application and removal with controlled, consistent compression and easy adjustment throughout the day.
- Designed for extended everyday wear — Combination of breathable fabric, cushioned back pad, and flexible splints designed to balance support and comfort for all-day use across occupational and daily settings.
The Tynor Back Support Belt may assist in managing discomfort associated with the following conditions:
- Lower back pain (lumbago) and lumbosacral muscle strain
- Occupational lower back strain — bending, lifting, prolonged standing, or desk-based work
- Postural discomfort associated with prolonged sitting, driving, or travel
- Lumbar spondylosis and mild degenerative lumbar spine changes
- General lumbar support during daily activity and rehabilitation
- Mild intervertebral disc conditions requiring supportive compression
- Lower back muscle weakness or fatigue requiring structured daily support
Use under the guidance of a qualified healthcare professional. If your physiotherapist, GP, or occupational therapist has recommended a lumbar support belt, confirm product code A 36 with your clinician. NDIS participants should contact us to confirm funding eligibility.
- Wear a thin cotton undergarment beneath the belt.
- Wrap the belt around the lower back and abdomen, positioning the back pad and splints centrally over the lumbar spine.
- Fasten the hook-and-loop closure at the front to a comfortable, firm compression.
- Pull the double-pull straps to add additional lumbar compression as required — adjust evenly on both sides.
- Check that breathing and movement feel comfortable and unobstructed. The compression can be further adjusted without removing the belt.
- Remove the belt periodically during rest to allow normal muscular function, as directed by your clinician.
- 1 × Tynor Back Support Belt A36 — Black (size as selected)
- Product instruction insert
- Close hook-and-loop closures before washing
- Hand wash only in mild detergent, water below 30°C — do not wring
- Dry flat in shade on a flat surface
- Do not dry-clean, iron, or bleach
- Use under the guidance of a qualified healthcare professional
- Do not wear so tightly as to cause pain, restricted breathing, or reduced circulation
- Discontinue use immediately and seek medical advice if you experience numbness, reduced blood flow, skin irritation, increased pain, or worsening symptoms
- Consult your doctor before concurrent use with any other medical device or spinal support
- Remove periodically throughout the day to help reduce the risk of lumbar muscular disuse — follow your clinician's guidance on wear duration
- Misuse or improper use may reduce effectiveness and lead to adverse effects
- Follow the instructions in the product box carefully
- Keep out of reach of children
How does the A36 compare to the A04, A05, and A06 in the Tynor range?
See the comparison table below — all four are lumbosacral support belts but with different constructions suited to different needs. The A36 is the everyday-use belt with four bilateral flexible splints and a cushioned back pad. Confirm which is most appropriate for your specific needs with your treating clinician.
Can the compression be adjusted during the day without removing the belt?
Yes — the double-pull mechanism allows compression to be increased or reduced at any time while wearing the belt. This is useful for varying activity levels throughout the day — firmer for physical tasks, eased off during rest periods.
Is it suitable for all-day wear at work?
The A36 is designed with everyday occupational use in mind — the breathable elastic body, cushioned back pad, and flexible splints are designed to balance support and comfort for extended wear. Your clinician can advise on the most appropriate wearing schedule for your individual needs.
Can I use NDIS funding?
Australian Healthcare Supplies is a registered NDIS provider. This product may be eligible under relevant NDIS support categories. Contact us to confirm eligibility for your plan.
All four products are lumbosacral support belts. The table below highlights the key differences to help you and your clinician identify the most appropriate option.
| Feature | A04 Lumbopore | A05 LS Belt Grey | A06 LS Belt Black | A36 Back Support |
|---|---|---|---|---|
| Splint type | Rigid posterior stays | Flexible conforming splints (posterior) | Semi-rigid posterior stays | 4 flexible splints — 2 each side |
| Back pad | Yes — integrated lumbar pad | Yes — soft cushiony pad | Yes — integrated lumbar pad | Yes — removeable back pad |
| Compression mechanism | Double-pull + hook-loop | Double-pull + hook-loop | Double-pull + hook-loop | Double-pull + hook-loop |
| Body material | Monofilament elastic + spacer fabric | Porous monofilament elastic | Neoprene / nylon composite | Breathable elastic |
| Colour | Beige | Grey | Black | Black |
| Support level | Firm — aesthetic design focus | Moderate — flexible, conforming | Firm — structured support | Moderate-firm — everyday comfort focus |
| Best suited for | Disc conditions, aesthetics, clinical use | Everyday use, flexible support | Firm daily support, post-op | Everyday occupational use, all-day comfort |
| Sizes | S–XXL | S–XXL | S–XXL | S–XXL |
Always confirm the most appropriate product with your treating physiotherapist, GP, or occupational therapist before purchasing.
Product Code: A 36
Sizes Available: S · M · L · XL · XXL — measure circumference at the navel; refer to size chart image
Colour: Black
Materials: Elastic body, Flexible splints (×4), Foam back pad, Hook-and-loop closure, Double-pull strap mechanism
Device Classification: Class I Medical Device
Certifications: ISO 9001 · ISO 13485 · ISO 45001 · US FDA Registered · CE Marked · W.H.O. GMP
Manufacturer: Tynor Orthotics Pvt. Ltd.
EC Representative: MT Promedt Consulting GmbH, Ernst-Heckel-Straße 7, 66386 St. Ingbert, Germany
Australian Supplier: Australian Healthcare Supplies, Perth WA — registered NDIS provider
Bulk & Institutional Orders: Contact us for hospital supply, clinic accounts, and volume pricing