Tynor Finger Extension Splint F03 | Support
NDIS Participants
Fracture Recovery
Post-surgical recovery
Post-injury support
NDIS Participant Support
The Tynor Finger Extension Splint (F-03) is a lightweight aluminium splint designed to immobilise, support and protect an injured finger while helping to maintain correct alignment during recovery. Made from a malleable, foam-lined aluminium body in an ergonomic U-shape, it can be bent — or even trimmed — to match the contours of the finger for a custom fit. A soft, hypoallergenic Ethafoam lining cushions the finger, while inbuilt hook-and-loop straps hold the splint securely and make it easy to put on and take off. Lightweight, compact and well ventilated, it fits either hand. Available in sizes S, M and L.
- Aluminium body — A lightweight yet sturdy aluminium body delivers strong immobilisation and support.
- Ethafoam padding — A soft, hypoallergenic foam lining provides high cushioning and comfortable wear.
- Lightweight & compact — Light, low-profile and well ventilated for comfortable everyday wear.
- Malleable & customisable — Can be bent, shaped or trimmed to suit the individual finger.
- Ergonomic U-shape — A U-shaped design supports the finger securely and makes the splint easy to apply.
- Hook-and-loop closures — Inbuilt fasteners give a close, secure grip and easy on-and-off.
The Tynor Finger Extension Splint is intended to immobilise, support and protect the finger and help maintain alignment during recovery, under the direction of a qualified healthcare professional.
- Metacarpophalangeal (knuckle) fractures
- Finger tendon injuries
- Trigger finger
- Finger arthritis
- Finger deformity support
- Post-surgical finger care
ⓘ Important: This is a Level 4/5 immobilisation splint. Fitting, shaping and duration of use should follow the advice of a qualified healthcare professional.
Use under the guidance of a qualified healthcare professional. Any bending or trimming to fit should be done as advised by your clinician.
- Unfasten the hook-and-loop closures.
- Position the splint on the injured finger, with the longer section sitting over the palm.
- Check the fit and shape.
- If needed, remove and customise (bend or trim) the splint.
- Reposition the splint on the finger.
- Fasten the hook-and-loop closures for a snug, comfortable fit.
- 1 × Tynor Finger Extension Splint (F-03)
- User instruction manual
- Clean with a moist, lint-free cloth
- Dry flat in the shade
- Do not dry-clean, iron or bleach
- Use only under the guidance of a qualified healthcare professional
- Any bending or trimming to fit should be done as advised by your clinician
- Discontinue use and seek medical advice if you experience impaired sensation, reduced blood flow, allergic rash or itching, or if pain persists or worsens
- Consult your doctor before using this device alongside another medical device
- Misuse or improper fitting may cause adverse effects and reduce effectiveness
- Follow the instructions provided on the box
- Keep out of reach of children
What is the Finger Extension Splint used for?
It immobilises and supports an injured finger — for example after a fracture, tendon injury or surgery, or for trigger finger or finger arthritis — as directed by a healthcare professional.
Can it be adjusted?
Yes — the malleable aluminium body can be bent, shaped and even trimmed to fit the finger; ask your clinician to help with fitting.
Does it fit either hand?
Yes — it can be worn on either hand.
How do I choose the right size?
Sizing is by finger length: S 3.8–5.1 cm (1.5–2 in), M 5.1–7.6 cm (2–3 in), L 7.6–10.2 cm (3–4 in).
Product Code: F 03
Sizes: S, M, L (by finger length — S: 3.8–5.1 cm, M: 5.1–7.6 cm, L: 7.6–10.2 cm)
Fitting: Either hand
Materials: Aluminium, Polyethylene foam (Ethafoam), Polyamide
Level of Immobilisation: 4/5
Device Classification: Class I Medical Device
Manufacturer: Tynor Orthotics Pvt. Ltd.
Australian Supplier: Australian Healthcare Supplies
I was expecting a finger support that would be rather uncomfortable and unable to be mould to me but it is extremely light weight, comfortable and while still remaining rigid, has enough malleability to personalise the brace somewhat.
Thank you so much for your kind words, Pat. We really appreciate you taking the time out to share your experience with us.
Used for a mallet finger extension injury — solid support throughout healing. Tynor finger splints are reliable — this is no exception.
Kept my broken finger perfectly immobilised throughout recovery — exactly what was needed. The ventilated design stops moisture buildup during extended wear.
My hand therapist recommended this for my PIP joint injury and it's been excellent. Takes a wear or two to position correctly but straightforward after that. Takes a wear or two to position correctly but straightforward after that.
Kept my broken finger perfectly immobilised throughout recovery — exactly what was needed. Universal sizing works for most — check the size chart for finger width. The ventilated design stops moisture buildup during extended wear.
Good finger stabilisation for a sprained DIP joint — holds the angle well. Durable construction that has held up well through recovery. Takes a wear or two to position correctly but straightforward after that.
Used for a mallet finger extension injury — solid support throughout healing. Takes a wear or two to position correctly but straightforward after that.
The aluminium stay is easily adjusted to the correct angle for my finger. Tynor finger splints are reliable — this is no exception.
Good finger stabilisation for a sprained DIP joint — holds the angle well. Takes a wear or two to position correctly but straightforward after that. Universal sizing works for most — check the size chart for finger width.
Good finger stabilisation for a sprained DIP joint — holds the angle well. Universal sizing works for most — check the size chart for finger width. Universal sizing works for most — check the size chart for finger width.
Kept my broken finger perfectly immobilised throughout recovery — exactly what was needed. Durable construction that has held up well through recovery.
Kept my broken finger perfectly immobilised throughout recovery — exactly what was needed. Well-made at this price point. Good value for a finger splint.
The splint is true to size, very solid construction, lightweight, and as comfortable as it can be for its function. All edges are smooth, the foam has remained attached to the metal, and the strapping is well padded.
Kept my broken finger perfectly immobilised throughout recovery — exactly what was needed. Easy to apply and remove with one hand — important when a finger is injured.
Used for a mallet finger extension injury — solid support throughout healing. The ventilated design stops moisture buildup during extended wear.
Good finger stabilisation for a sprained DIP joint — holds the angle well. Comfortable enough to wear all day without skin irritation.
Good finger stabilisation for a sprained DIP joint — holds the angle well. Universal sizing works for most — check the size chart for finger width.
Used for a mallet finger extension injury — solid support throughout healing. Takes a wear or two to position correctly but straightforward after that. Easy to apply and remove with one hand — important when a finger is injured.
The aluminium stay is easily adjusted to the correct angle for my finger. Well-made at this price point. Good value for a finger splint.
Physio-prescribed for my finger fracture and it has worked well throughout recovery. Easy to apply and remove with one hand — important when a finger is injured.
Physio-prescribed for my finger fracture and it has worked well throughout recovery. Easy to apply and remove with one hand — important when a finger is injured.
Kept my broken finger perfectly immobilised throughout recovery — exactly what was needed. Tynor finger splints are reliable — this is no exception. Well-made at this price point. Good value for a finger splint.
Good finger stabilisation for a sprained DIP joint — holds the angle well. Fast dispatch from the Perth warehouse. Arrived in Canberra in perfect condition. Durable construction that has held up well through recovery. The ventilated design stops moisture buildup during extended wear.
Used for a mallet finger extension injury — solid support throughout healing. Takes a wear or two to position correctly but straightforward after that.
The aluminium stay is easily adjusted to the correct angle for my finger. Universal sizing works for most — check the size chart for finger width.
The aluminium stay is easily adjusted to the correct angle for my finger. Well-made at this price point. Good value for a finger splint.
My hand therapist recommended this for my PIP joint injury and it's been excellent. Durable construction that has held up well through recovery. Easy to apply and remove with one hand — important when a finger is injured.
Used for a mallet finger extension injury — solid support throughout healing. Takes a wear or two to position correctly but straightforward after that.
Used for a mallet finger extension injury — solid support throughout healing. Easy to apply and remove with one hand — important when a finger is injured.
Good finger stabilisation for a sprained DIP joint — holds the angle well. Easy to apply and remove with one hand — important when a finger is injured.
The aluminium stay is easily adjusted to the correct angle for my finger. Durable construction that has held up well through recovery. Tynor finger splints are reliable — this is no exception.
Used for a mallet finger extension injury — solid support throughout healing. Tynor finger splints are reliable — this is no exception.