Easwe C30 Carbon Fibre Electric Wheelchair | NDIS | Australia
NDIS Participants
Everyday Independent Mobility
Users between 150–190 cm in height and up to 120 kg in weight
Appointments & Shopping
NDIS Participant Support
The Easwe C30 is an ultra-lightweight carbon fibre electric wheelchair designed to assist independent mobility for people with disability, seniors, and individuals who require a portable, high-performance powered mobility solution for daily use and travel. Weighing just 11.3 kg (25 lb) without the battery — making it one of the lightest electric wheelchairs available in Australia — the C30 is built from a premium high-strength carbon fibre frame designed for exceptional durability while remaining light enough to lift with one hand. Powered by dual 200W brushless motors, with an airline-approved lithium battery and honeycomb puncture-proof tyres, it is designed for confident indoor and outdoor use. Supplied by Australian Healthcare Supplies, a registered NDIS provider based in Perth, Western Australia.
| 1 × Battery Standard Range |
2 × Batteries Extended Range |
|
|---|---|---|
| Range per Charge | Up to 24 km / 15 miles | Up to 48 km / 30 miles |
| Batteries Included | 1 × lithium-ion | 2 × lithium-ion |
| Airline Approved | ✓ Yes — UN38.3 certified | ✓ Yes — each battery individually approved |
| Best For | Daily errands, short outings, home use | Full-day outings, travel, community access |
Range estimates based on flat terrain, 75 kg user at 33°C. Actual range varies with user weight, terrain, and conditions. Contact us if you need help choosing the right configuration for your NDIS plan.
- Ultra-lightweight carbon fibre frame — 11.3 kg — The high-strength carbon fibre frame is designed to provide exceptional durability while weighing just 11.3 kg (25 lb) without battery — light enough to lift with one hand and load into a car boot without assistance. Significantly lighter than comparable aluminium-frame electric wheelchairs.
- Dual 200W brushless motors — 400W total — Quiet, efficient IPX5 waterproof motors designed to assist navigation on flat surfaces, gentle inclines up to 12°, gravel, and uneven footpaths — suitable for both indoor and outdoor use.
- Foldable compact design — Designed to fold quickly for storage in a car boot, taxi, or transport vehicle, and compact enough for travel by air, train, or ferry.
- Airline-approved lithium battery — UN38.3 certified lithium-ion battery designed to meet airline carry-on requirements. Single battery provides up to approximately 24 km range; dual battery extends to approximately 48 km.
- Shock-absorbing suspension system — Suspension in both the seat and front wheels designed to help reduce vibration and assist comfort on uneven surfaces and kerbs.
- IPX5 waterproof LCD joystick controller — 360° joystick with real-time battery level and speed display, designed for precise directional control and rated for use in rain.
- Honeycomb puncture-proof tyres — Maintenance-free front and rear tyres designed for reliable indoor and outdoor performance — no inflation, no punctures.
- Comprehensive safety features — Intelligent electromagnetic braking system, anti-tip rear wheels, seat belt, and LED safety lights designed to assist user safety during daily use.
- 95% pre-assembled — Only battery and controller installation required on arrival, designed for straightforward setup without tools.
The Easwe C30 is designed to assist people who experience reduced lower limb mobility due to disability, injury, age-related decline, or chronic health conditions affecting independent walking. Its ultra-lightweight carbon fibre construction makes it particularly well-suited for NDIS participants and individuals who travel regularly, load the chair into a car independently, or require a portable powered mobility solution for community access, medical appointments, shopping, and air travel. Recommended for users between 150–190 cm in height and up to 120 kg (265 lb).
Australian Healthcare Supplies is a registered NDIS provider. The Easwe C30 electric wheelchair may be eligible for funding under an NDIS participant's plan under the Assistive Technology (Capital Supports) category. Funding eligibility and approval depends on your individual NDIS plan and goals. We recommend discussing this product with your Support Coordinator or Occupational Therapist to confirm clinical suitability and funding pathway before purchasing. We can provide invoices, product specifications, and supporting documentation for NDIS purposes. Contact us to discuss NDIS purchasing options.
- Unbox and unfold the wheelchair — confirm the frame is locked securely in position.
- Install the joystick controller onto the armrest as shown in the included manual.
- Insert the lithium-ion battery and connect securely.
- Charge fully before first use (approximately 5–6 hours).
- Power on and test joystick movement in a clear area before first full use.
- 1 × Easwe C30 Carbon Fibre Electric Wheelchair (95% pre-assembled)
- 1 or 2 × Lithium-ion battery (UN38.3 airline-approved — as per variant selected)
- 1 × IPX5 LCD joystick controller
- 1 or 2 × Battery charger
- 1 × Seat belt (fitted)
- 1 × User manual (printed)
- Wipe the frame and seat with a soft, damp cloth — do not hose down or submerge electrical components
- The joystick is IPX5 rated — avoid submersion
- Charge the battery regularly and store it in a cool, dry location when not in use
- Regularly inspect tyres, brakes, joystick, frame locks, and battery connection
- Follow the full maintenance instructions in the user manual
- Confirm suitability with a qualified healthcare professional or occupational therapist before use
- Do not exceed the maximum load capacity of 120 kg (265 lb)
- Not designed for use on steep slopes exceeding 12°, stairs, escalators, sand, or deep water
- Always fasten the seat belt during use
- Confirm airline battery carry-on requirements with your airline before travelling by air
- Do not leave the battery charging unattended for extended periods
- Misuse or use outside stated conditions may cause injury or damage
- Follow all instructions in the product manual carefully
- Keep out of reach of unsupervised children
| Frame Material | High-strength carbon fibre |
| Net Weight (without battery) | 11.3 kg / 25 lb |
| Maximum Load Capacity | 120 kg / 265 lb |
| Recommended User Height | 150–190 cm (4'11" – 6'3") |
| Motor | Dual 200W brushless motors (400W total) — IPX5 waterproof |
| Maximum Speed | 6.4 km/h (4 mph) |
| Battery | Lithium-ion — detachable, UN38.3 airline-approved |
| Range — Single Battery | Up to approx. 24 km / 15 miles (flat terrain, 75 kg user) |
| Range — Dual Battery | Up to approx. 48 km / 30 miles (flat terrain, 75 kg user) |
| Charge Time | Approximately 5–6 hours per battery |
| Maximum Slope | 12° |
| Tyres | Honeycomb puncture-proof — front and rear |
| Braking System | Intelligent electromagnetic braking |
| Controller | 360° LCD joystick — IPX5 waterproof, real-time battery and speed display |
| Safety Features | Anti-tip rear wheels, seat belt, and LED safety lights |
| Foldable | Yes — compact fold for car boot, transport, and storage |
| Seat Width | 41 cm / 16" |
| Assembly | 95% pre-assembled — battery and controller installation only |
| Warranty — Frame | 5 years (manufacturing defects — original purchaser) |
| Warranty — Components | Motor, battery, and components covered under separate warranty periods — refer to Easwe's warranty policy |
| Indoor / Outdoor | Both — footpaths, gentle inclines, gravel, indoor surfaces |
| Airline Approved Battery | Yes — UN38.3 certified |
Brand: Easwe | Model: C30
Frame: Carbon fibre — 11.3 kg without battery
Maximum Load: 120 kg
Maximum Speed: 6.4 km/h
Maximum Slope: 12°
Seat Width: 41 cm
NDIS Support Category: Assistive Technology (Capital Supports)
Registration Group: Assistive Products for Personal Mobility
AT Level: Complex AT — OT assessment and prescription recommended
Australian Supplier: Australian Healthcare Supplies, Perth WA — registered NDIS provider
Frame Warranty: 5 years (manufacturing defects)
Bulk & Institutional Orders: Contact us for hospital supply, aged care facility accounts, and volume pricing
What is the difference between the Easwe C30 and the Easwe B10?
The C30 is built from premium carbon fibre and weighs just 11.3 kg — designed for users who prioritise maximum portability, travel, and independent loading. The B10 is built from aluminium alloy and weighs approximately 18 kg — designed for everyday use with a reclining backrest and headrest. If you travel frequently or need to lift the chair independently, the C30 is the better choice. If you require a reclining backrest for extended comfort, the B10 may be more appropriate. Confirm with your OT which model better suits your mobility goals.
Is the Easwe C30 suitable for outdoor use in Australia?
Yes — the C30 is designed for both indoor and outdoor use. Honeycomb puncture-proof tyres and shock-absorbing suspension assist performance on footpaths, light gravel, and gentle inclines up to 12°. The IPX5 waterproof joystick protects rain. Not designed for steep inclines, off-road terrain, sand, or deep water.
Can the Easwe C30 be taken on an aeroplane?
The lithium-ion battery is UN38.3 airline-approved. Always contact your airline before travel to confirm wheelchair carry-on policies, battery documentation requirements, and any additional conditions.
Can I use NDIS funding for the Easwe C30?
Australian Healthcare Supplies is a registered NDIS provider. The Easwe C30 may be eligible for NDIS funding under the Assistive Technology (Capital Supports) category. Speak with your Support Coordinator or Occupational Therapist to confirm eligibility. Contact us for NDIS invoices and supporting documentation.