Tynor Cervical Traction Kit (Sitting) G 25 | Neck Traction Kit
Physiotherapy Patients
Post-injury support
Spinal & postural support (as advised)
Neck Strain
Cervical spine injuries
NDIS Participants
NDIS Participant Support
The Tynor Cervical Traction Kit (Sitting) G 25 is a complete traction apparatus designed to apply controlled traction to the cervical and upper thoracic spine while seated upright. It works by gently stretching the musculature and connective tissue of the neck, helping to ease pressure across the intervertebral joint space so traction therapy can be carried out conveniently at home or in a clinic. The kit assembles from an overdoor pulley, head halter, spreader bar, cord and a custom-fillable weight bag for a ready-to-use system. Supplied by Australian Healthcare Supplies, a registered NDIS provider based in Perth, Western Australia.
- Complete, ready-to-use kit with all essential attachments in one box.
- Overdoor pulley made of coated mild steel fits doors 25 mm to 50 mm wide, or hangs on a wall bracket, with three pulleys for smooth force transmission.
- Anatomic head halter in three-layered PU-bonded fabric with hypoallergenic cotton stockinette and a polymer gel insert for cushioned occiput support with no pressure points.
- Lightweight yet sturdy cast-aluminium spreader bar holds the two halter cord loops.
- Smooth-surfaced traction cord woven for strength to minimise frictional loss.
- Weight bag can be custom filled with water or sand from 1 to 12 kg.
May assist in managing discomfort associated with the following conditions:
- Cervical spondylitis
- Cervical disc disease
- PIVD and IVD herniation
- Cervical facet syndrome
- Fractures of the cervical spine
- Stiff neck muscles and mechanical stress due to poor posture
- Hang the overdoor pulley on the top of a door, or mount it on a wall using a wall bracket.
- Unfasten the hook-and-loop side straps and slide the head through the halter.
- Place the cushioned pad at the back, aligning with the occiput; the front pad sits under the chin.
- Fasten the hook-and-loop straps for a stable, comfortable fit and trim any excess strap.
- Hook the two halter straps into the slots of the spreader bar.
- Connect the spreader bar to the weight bag through the traction cord and overdoor pulley, then use seated upright on a chair.
- Maintain a slight forward angle of the neck for balanced force distribution.
- Cervical Traction Overdoor Pulley
- Cervical Traction Head Halter
- Cervical Traction Spreader Bar
- Traction Cord
- Traction Weight Bag
- Fabric components: hand wash with mild detergent in water below 30°C without wringing. Dry in shade on a flat surface. Do not dry-clean, iron or bleach.
- Metal components: wipe with a clean, moist cloth.
- Use this product under the strict guidance of a qualified doctor.
- Discontinue use and seek medical advice in case of impaired sensation, impaired blood flow, allergy, rash or itching, or if pain increases or persists.
- Consult your doctor in case of concurrent use of another medical device.
- Misuse or improper use of the device can lead to adverse effects and decreased effectiveness.
- A light to medium weight is generally used; consult a qualified physician for specific weight guidance.
- Keep out of reach of children.
- Please check with your doctor, physiotherapist, or healthcare professional to confirm this product is suitable for your condition and correct sizing.
Is this kit for seated or lying use?
This kit is designed for seated upright use on a chair. A separate sleeping version is available for use while lying down.
How much weight can the bag hold?
The weight bag can be custom filled with water or sand to a weight from 1 to 12 kg. Your healthcare professional will advise the appropriate load.
Where can the pulley be fitted?
The overdoor pulley fits doors from 25 mm to 50 mm wide, or can be mounted on a wall using a wall bracket.
Does it need professional supervision?
Yes. Cervical traction should be set up and used under the guidance of a qualified doctor or physiotherapist.
- Product Code: G 25
- Sizes Available: Universal
- Device Classification: Class I Medical Device
- Certifications: ISO 9001 · ISO 13485 · ISO 45001 · US FDA Registered · CE Marked · W.H.O. GMP
- Materials: Steel, Nylon, Aluminium, P.U, Cotton, Polymer Gel, Polyester
- Manufacturer: Tynor Orthotics Pvt. Ltd.
- EC Representative: MT Promedt Consulting GmbH, Ernst-Heckel-Straße 7, 66386 St. Ingbert, Germany
- Australian Supplier: Australian Healthcare Supplies, Perth WA — registered NDIS provider
- Bulk & wholesale orders: sales@tynor.com.au