Tynor Contoured Lumbosacral Support | Rigid Back Brace Australia

• Customisable aluminium splints — Pre-shaped aluminium splints can be individually removed, reshaped to match the patient's spinal anatomy, and reinserted — designed to provide personalised, anatomically correct support and a high degree of immobilisation.
• High degree of lumbosacral immobilisation — Rigid, malleable splints integrated into the back panel are designed to assist effective immobilisation of the lumbosacral region, providing reinforcement to the back muscles during recovery and rehabilitation.
• Double-pull elastic mechanism — Designed to provide extra compression and a firm grip to the lumbosacral region, assisting effective splinting action and a more secure fit throughout the day.
• Extra-strong orthopaedic webbing — Designed to provide firm, durable compression around the waist for extended clinical use.
• Broad hook-and-loop closure — Designed to allow controlled compression, flexibility in sizing, and quick, easy application and removal.
• Individually adapted fit — Designed to be customised by a trained orthopaedic technician for maximum immobilisation and personalised wearing comfort.

The Tynor Contoured Lumbosacral Support may assist in managing discomfort and supporting recovery associated with the following conditions:

• Lumbar spondylitis and spondylosis
• Intervertebral disc syndrome — prolapse, herniation, degeneration
• Post-discectomy care and recovery
• Osteoporotic pain of the lumbar spine
• Low back pain (lumbago), postural fatigue, and mechanical stresses associated with poor posture
• Stabilisation during vertebral fracture and spinal injuries — as directed by a treating clinician
• Degenerative changes of the lumbar spine
• Support during long working hours and travel where a higher level of lumbar immobilisation is required

The Tynor Contoured Lumbosacral Support is designed to be used under the strict guidance of a qualified healthcare professional and must be individually adapted by a trained orthopaedic technician to ensure correct fit, maximum immobilisation, and wearing comfort. If your physiotherapist, GP, or surgeon has recommended a rigid lumbosacral brace or contoured LS support, confirm product code A 07 with your clinician. NDIS participants should contact us to confirm funding eligibility.

1. Remove the aluminium splints from their pockets and reshape them to match the patient's spinal anatomy — this step should be performed by a trained orthopaedic technician.
2. Reinsert the customised splints back into their pockets securely.
3. Wear over a thin cotton undergarment for best skin comfort.
4. Wrap the belt around the waist keeping it upright — follow the "up inside" label for correct orientation.
5. Place the back panel in the centre of the vertebral column with the lower edge aligned to the base of the spine.
6. Fasten the hook-and-loop closure to a comfortable, firm compression.
7. Stretch and fasten the double-pull elastic mechanism for added grip and firmness of the splints.

• 1 × Tynor Contoured Lumbosacral Support (size as selected)
• Customisable aluminium splints (pre-fitted)
• Product instruction insert

• Remove aluminium splints from pockets before washing
• Close all hook-and-loop closures before washing
• Hand wash only in mild detergent, water below 30°C — do not wring
• Dry flat in shade on a flat surface
• Do not dry-clean, iron, or bleach

• Use under the strict guidance of a qualified healthcare professional
• Must be individually adapted by a trained orthopaedic technician before use — do not self-fit this brace
• Wear over a cotton undergarment or lining — do not wear directly against bare skin for extended periods
• Adjust padding and strapping for a secure and comfortable fit
• Discontinue use and seek medical advice if you experience impaired sensation, impaired blood flow, skin rash, itching, increased pain, or worsening symptoms
• Concurrent use with excessive physical exertion may restrict heart and lung performance — consult your doctor before use during strenuous activity
• Consult your doctor before concurrent use with any other medical device
• Misuse or improper use may reduce effectiveness and lead to adverse effects
• Follow the instructions in the product box carefully
• Keep out of reach of children

What makes the Tynor Contoured Lumbosacral Support different from other lumbar belts?
The Contoured Lumbosacral Support features customisable aluminium splints that can be individually shaped to match each patient's spinal anatomy by a trained orthopaedic technician — providing a significantly higher level of personalised immobilisation than standard elastic lumbar belts. It is designed for conditions requiring firm, rigid lumbosacral support rather than flexible everyday support.

Does this brace need to be fitted by a professional?
Yes — the Tynor Contoured Lumbosacral Support must be individually adapted by a trained orthopaedic technician before use to reshape the aluminium splints to the patient's anatomy. Using this brace without professional fitting may result in inadequate immobilisation or discomfort. This is a clinical product and is not intended for self-fitting.

Can it be used after spinal surgery or discectomy?
The Contoured Lumbosacral Support is designed for post-discectomy care and recovery and may assist stabilisation following vertebral fracture or spinal injury. Post-operative and post-fracture use must be directed and supervised by the treating surgeon or physician — do not use for post-surgical support without explicit clinical guidance.

Can I use NDIS funding?
Australian Healthcare Supplies is a registered NDIS provider. This product may be eligible under relevant NDIS support categories. Contact us to confirm eligibility for your plan.

Product Code: A 07
Sizes Available: S · M · L · XL · XXL
Materials: Aluminium, Polyester, Etha foam, Polyamide, Rubber
Device Classification: Class I Medical Device
Certifications: ISO 9001 · ISO 13485 · ISO 45001 · US FDA Registered · CE Marked · W.H.O. GMP
Manufacturer: Tynor Orthotics Pvt. Ltd.
EC Representative: MT Promedt Consulting GmbH, Ernst-Heckel-Strasse 7, 66386 St. Ingbert, Germany
Australian Supplier: Australian Healthcare Supplies, Perth WA — registered NDIS provider
Clinical Note: Must be individually adapted by a trained orthopaedic technician before clinical use
Bulk & Institutional Orders: Contact us for hospital supply, clinic accounts, and volume pricing

Download Product Manual (PDF)