Tynor Knee Support Hinged Neoprene J01 | Neoprene Hinged Knee Brace
NDIS Participants
Knee Rehabilitation
Sports and training support
Post-surgical recovery
NDIS Participant Support
The Tynor Knee Support Hinged (Neoprene) (J-01) is a versatile neoprene knee brace that combines controlled, all-round compression with the rigid side support of hinged splints. Biaxial, heavy-duty aluminium hinges sit in side pockets to give side-to-side stability and full weight-bearing support while allowing normal, free flexion of the knee. An anterior patellar opening with a silicone buttress supports and positions the kneecap, and the three-layered, four-way-stretch neoprene retains gentle warmth and moulds comfortably to the knee. Hook-and-loop closures and additional straps let you set the compression and improve the splinting action, with anti-tourniquet strapping for comfortable, even pressure. Available in sizes S to XXXL.
- Rigid hinged splints — Biaxial, heavy-duty aluminium hinges give side-to-side stability and full weight-bearing support while allowing free knee flexion.
- Anatomic pull-on design — Ergonomically shaped for uniform, controlled compression with no bunching when the knee bends.
- Additional straps — Extra straps improve the splinting action and let you fine-tune the support.
- Silicone patellar buttress — An anterior patellar opening with a silicone buttress supports and positions the kneecap.
- Four-way-stretch neoprene — A three-layered, four-way-stretch neoprene body moulds to the knee and retains gentle warmth.
- Anti-tourniquet strapping — Helps spread pressure evenly and avoid a constricting band.
The Tynor Knee Support Hinged is intended to provide compression, warmth and rigid lateral support to the knee, under the direction of a qualified healthcare professional.
- Knee instability or chronic laxity
- Ligament and meniscus injuries of the knee
- Patellar conditions (e.g. patellar instability, patellofemoral conditions, chondromalacia)
- Osteoarthritis of the knee
- Post-operative and post-cast knee support
- Muscular sprains and strains of the knee
- Protective support during sport
ⓘ Important: Align the centre (fulcrum) of the hinges with the centre of the knee and match the hinge movement to your natural knee bend. Fasten the straps to a comfortable compression — firm but not so tight that it restricts circulation. The brace should be removed while sleeping.
Use under the guidance of a qualified healthcare professional, who can confirm the right level of support for your knee.
- Pull the brace onto the leg and position the patellar opening over the kneecap.
- Align the centre of each hinge with the centre of the knee.
- Check that the hinge flexion matches the natural bend of your knee.
- Fasten the hook-and-loop closures and additional straps to a comfortable, secure compression.
- 1 × Tynor Knee Support Hinged (Neoprene) (J-01)
- User instruction manual
- Close the hook-and-loop straps before washing
- Hand wash with mild detergent in water below 30°C; do not wring
- Dry flat in the shade
- Do not dry-clean, iron or bleach
- Use under the guidance of a qualified healthcare professional
- Remove the brace while sleeping
- Discontinue use and seek medical advice if you experience impaired sensation, reduced blood flow, allergic rash or itching, or if pain persists or worsens
- Fasten firmly but not so tightly that it restricts circulation
- Consult your doctor before using this device alongside another medical device
- Misuse or improper fitting may reduce effectiveness or cause adverse effects
- Follow the instructions provided on the box
- Keep out of reach of children
What is the Hinged Knee Support used for?
It provides compression, warmth and rigid lateral support to the knee — for instability, ligament and meniscus injuries, patellar conditions, osteoarthritis and post-operative support — as directed by a healthcare professional.
Does it allow the knee to bend?
Yes — the biaxial aluminium hinges give side-to-side stability while allowing normal, free flexion.
What is the patellar opening for?
The anterior opening and silicone buttress support and position the kneecap and relieve pressure over it.
How do I choose the right size?
Use the size chart (S–XXXL) and check with your clinician if you are between sizes.
Product Code: J 01
Sizes: S, M, L, XL, XXL, XXXL
Materials: Aluminium, Polyester, Polyamide, Silicone, Neoprene, Mild Steel
Device Classification: Class I Medical Device
Manufacturer: Tynor Orthotics Pvt. Ltd.
Australian Supplier: Australian Healthcare Supplies