Tynor Lumbo Lacepull Brace A29 | NDIS Lumbar Back Brace Australia

• Multi-pulley lacepull compression system — Designed to deliver independent pressure to the thoracic and lumbar vertebrae simultaneously; the pulley-multiply effect means less pulling force is required to achieve firm, even compression across the entire lumbosacral region.
• Semi-rigid anatomical back panel — Designed to conform to the natural lumbar curve, assisting postural support and designed to help stabilise the lumbosacral region during movement and activity.
• Independent top and bottom pressure control — The lacepull system allows the upper and lower sections of the brace to be tightened independently, enabling targeted support for individual clinical needs.
• Anterior rigid plate compatibility — The front panel is designed to house an optional anterior rigid plate for enhanced lumbar IVD decompression, as directed by a clinician.
• Highly porous, ventilated body — Aerated mesh fabric designed for breathability and patient comfort during extended daily wear.
• Designed for independent application — Ergonomic brace design allows the patient to wear, tighten, and remove the brace without assistance, including for older adults and those with limited strength.

The Tynor Lumbo Lacepull Brace may assist in managing discomfort associated with the following conditions:

• Lumbar intervertebral disc (IVD) conditions — prolapse, herniation, and degeneration
• Multi-level lumbar decompression support
• Post-operative stabilisation following lumbar discectomy, decompression, or spinal surgery
• Lumbar spondylitis and spondylosis
• Lumbar spondylolisthesis
• Degenerative disc disease and age-related lumbar spine changes
• Lumbar muscle sprains, strains, and soft tissue injury
• Occupational or postural lower back strain requiring firm support
• General lower back pain (lumbago) requiring structured immobilisation support

Use under the guidance of a qualified healthcare professional. If your physiotherapist, GP, or spinal surgeon has recommended a lumbar brace or lumbosacral support, confirm product code A 29 with your clinician. NDIS participants should contact us to confirm funding eligibility.

1. Wear a thin cotton undergarment or liner beneath the brace.
2. Wrap the brace around the lower back and abdomen, positioning the back panel over the lumbar spine.
3. Fasten the hook-and-loop closure at the front to a comfortable, firm fit.
4. Pull the lacepull cord to tighten the upper and lower sections independently — adjust each to the level of support required.
5. Check that breathing and movement feel comfortable and unobstructed before completing application.
6. Loosen or remove the brace during rest periods as directed by your clinician.

• 1 × Tynor Lumbo Lacepull Brace (size as selected)
• Product instruction insert

• Close hook-and-loop closures before washing
• Hand wash only in mild detergent, water below 30°C — do not wring
• Dry flat in shade on a flat surface
• Do not dry-clean, iron, or bleach

• Use under the strict guidance of a qualified healthcare professional
• Do not overtighten the lacepull cord — compression should be firm but must not restrict breathing or circulation
• Discontinue use immediately and seek medical advice if you experience numbness, reduced blood flow, skin irritation, increased pain, or worsening symptoms
• For post-operative use, apply only as directed by your treating surgeon or physician — do not self-prescribe
• Consult your doctor before concurrent use with any other medical device or spinal support
• The product is preferably worn over a cotton undergarment to protect the skin
• Misuse or improper use may reduce effectiveness and lead to adverse effects
• Follow the instructions in the product box carefully
• Keep out of reach of children

What makes the A29 different from a standard lumbar belt?
The Tynor Lumbo Lacepull Brace uses a multi-pulley lacepull mechanism that delivers independent compression to the upper and lower back simultaneously — unlike standard lumbar belts which provide a single uniform compression band. This makes it more suitable for disc-related conditions, post-operative recovery, and cases where targeted lumbar IVD decompression support is required. Confirm suitability with your treating clinician.

Which size should I order?
Measure your waist circumference around the navel, standing or sitting with your back straight. S&M fits 28–36” (71–91 cm). L&XL fits 36–44” (91–112 cm). XXL&XXXL fits 44–52” (112–132 cm). If you are at the upper limit of a size range, choose the next size up. If you are unsure, contact us with your measurement before ordering. Note: some stock may still be labelled in the old Universal / Special sizing — use your waist measurement to confirm fit regardless of the label.

Measure circumference around the navel, back straight. If at the upper limit of a size, choose the next size up.

Current Sizing (New)

Previous Sizing (for reference — some stock may still carry these labels)

Not sure which size? Contact us with your waist measurement (around the navel) and we will confirm before you purchase.

Can it be used after lumbar spine surgery?
The Tynor Lumbo Lacepull Brace is designed to assist post-operative stabilisation following lumbar discectomy, decompression, and related spinal procedures. Post-operative use must be directed and supervised by your treating surgeon or physician only — do not self-prescribe for post-surgical support.

Can I use NDIS funding?
Australian Healthcare Supplies is a registered NDIS provider. This product may be eligible under relevant NDIS support categories. Contact us to confirm eligibility for your plan.

Product Code: A 29
Sizes Available: S&M (28–36” / 71–91 cm) · L&XL (36–44” / 91–112 cm) · XXL&XXXL (44–52” / 112–132 cm)
Previous Sizes: Universal (28–40”) · Special (40–52”) — some stock may still carry old labels
Materials: Polyamide, Polyethylene, PVC, Polyester, Polyurethane, Aerated mesh fabric
Device Classification: Class I Medical Device
Certifications: ISO 9001 · ISO 13485 · ISO 45001 · US FDA Registered · CE Marked · W.H.O. GMP
Manufacturer: Tynor Orthotics Pvt. Ltd.
EC Representative: MT Promedt Consulting GmbH, Ernst-Heckel-Straße 7, 66386 St. Ingbert, Germany
Australian Supplier: Australian Healthcare Supplies, Perth WA — registered NDIS provider
Bulk & Institutional Orders: Contact us for hospital supply, clinic accounts, and volume pricing

Download Product Manual (PDF)